8 Inch Heavy Duty Folding Bracket,1 Pair Stainless Steel Shelf Bracket

£17.60

Opis

SummarySturdy and Durable: The foldable shelf bracket is made of high quality stainless steel with a smooth surface to prevent scratching, has good resistance to corrosion and rust, and the triangular shape is the most stable structureof the wall bracket.Space saving: The foldable shelf bracket is attached to the wall at a 90 degree angle and has only one mounting surface. It takes up very little space. Just press the release arm and the stand can be folded, which can keepyour clean and tidy room.Widely Used: The folding stand is very suitable for many DIY jobs and is an extension of shops, workshops, boats, RVs, backyards, caravans, bedrooms, kitchens, balconies, bathrooms and other places .They can also be used for shelving, kitchen shelves and exhibition stands.Easy to Install: The foldable hinge bracket is easy to install and fold, so you can build a foldable shelf bracket or a small wall-mounted folding table for your home or garage. You just need to make sure thatthe two folding brackets are parallel to each other and perpendicular to the wall.8 Inch Heavy Duty Folding Bracket,1 Pair Stainless Steel Shelf Bracket DescriptionSturdy and Durable: The foldable shelf bracket is made of high quality stainless steel with a smooth surface to prevent scratching, has good resistance to corrosion and rust, and the triangular shape is the most stable structureof the wall bracket.
Space saving: The foldable shelf bracket is attached to the wall at a 90 degree angle and has only one mounting surface. It takes up very little space. Just press the release arm and the stand can be folded, which can keepyour clean and tidy room.
Widely Used: The folding stand is very suitable for many DIY jobs and is an extension of shops, workshops, boats, RVs, backyards, caravans, bedrooms, kitchens, balconies, bathrooms and other places .They can also be used for shelving, kitchen shelves and exhibition stands.
Easy to Install: The foldable hinge bracket is easy to install and fold, so you can build a foldable shelf bracket or a small wall-mounted folding table for your home or garage. You just need to make sure thatthe two folding brackets are parallel to each other and perpendicular to the wall.
Specification:

Material: stainless steel
Installation method: screw fixing
Color: silver
Dimensions: 30 x 12.8 x 2 cm / 12 x 5 x 0.8 inches (length x height x width) ;;
Weight (pc): 340 g x 2
Maximum load weight: 75 kg
Package Contents: 2 x Heavy Duty Folding Bracket, 8 x Mounting Screws

Note:

1. The product does not contain a wooden board.
2. The product should be installed horizontally and tight to prevent loosening.
3. During use, the maximum load capacity, wall thickness and plate thickness should be taken into account so that the console is not overloaded and does not damage the wall or the plate.
4. The width of the board must be at most 5 cm longer than the stainless steel support.
5. The number of foldable brackets can be increased depending on the length of the panel, which can increase the load capacity.

Installation method:

1. Measure the position of the support on the map
2. Reserve 1 mm (0.04 inch) for the plate at the end of the wall (near the wall).
3. Mark the position of the punch on the board.
4. Secure the bracket to the card using short screws.
5. Use a spirit level to make sure it is parallel and mark the correct position on the wall.
6. Use a drill to drill a hole in the mark.
7. Insert the expansion tube into the hole.
8. Secure the bracket with long screws.
9. Lift the spring-loaded button and press it to bend it. Product Tags Heavy Duty

Popular Products in Heavy Duty Shelf Brackets

sour cream powder, bell howell disk solar lights, temporary wardrobe, coat rack and storage, inflatable floating island, mini camera spy wireless, personal cup, full christmas trees, kanken classic backpack, the lady of shadows, purple tesla, babyliss hair straighteners, home and garden store, tin cup ball marker

yyyyy

Check